Contact us

Support Documentation

hardware support symbol
IOX and add-on documentation

Firmware Release Notes

RELEASE NOTES
GO7 Firmware Versions

GO7 - Release Firmware - 109.7.31 / 107.7.31

Key Features:

  • Enhanced security measures and improvements
  • Improved S&F failover efficiency
  • Enhanced protocol support (including WWH-OBD)
  • Additional IOX support
  • GO RUGGED support
  • Enhanced vehicle rollover detection
  • Date/Time retrieved from S&F server (If no GPS latch available) on initial install.
  • Modem related improvements (APN list updated, Enhanced performance in Roaming areas, Sprint PRL OTA update)
  • Engine Snapshot data improvements
  • Support for Pre-calibrated Accelerometer
  • Improved VIN detection logic
  • Various Seatbelt and ODO improvements
  • Various Fuel/Diesel improvements
  • Diesel Fuel for vehicles in European market
  • 23 hour heart-beat for BMW vehicles
  • BMW-related improvements (IGN detect fix and enhanced engine data support)
  • Enhancements to Max Road Speed (J1939 protocol)
  • Adjustable timeframe for low voltage warning
  • Device enters disabled state for ‘RAM Error’
  • Support for WWH OBD Data
  • Mobileye, Valor, Dickey-John, NFC DriverID and External Buzzer Support
  • Additional HOS Support (Android, Garmin, SUPA, M4X)
  • APN based on location + more APNs supported
  • Enhanced Intermittent Connection Logic
  • Auto Soft reset when custom parameter applied
  • Enhanced Hybrid/EV data support (Charging/battery/current status)
  • Improved support for vehicles with “STOP/START” technology
  • HID RFID Trigger support
  • DTC UART message support for Third Party device
  • J1939 Fault logging (Cummins) enhancements
More detailed information on Released features and access to the historic changelog is available in the Firmware Release notes, please visit: https://goo.gl/4vr0dO

GO7 - Development Firmware - 109.9.14+ / 107.9.14+

Key Features:

  • Authorized Driver ID ‘whitelist’ support
  • External Device integration via IOX-USB
  • Extended temperature monitoring while IGN OFF
  • DPF and DEF level data support for OBD2 and WWH protocols
  • Support for Mercedes Actros Odometer
  • Various Seatbelt and ODO improvements
  • Various Fuel/Diesel improvements
  • More detailed information on Beta features and improvements is available in the ‘What’s Coming’ section in the Firmware Release notes, please visit: https://goo.gl/4vr0dO
  • If you would like to run this version on your devices please enrol into the ‘Beta Program’. For more information on the ‘Beta Program’ please visit: https://goo.gl/Tki5xk
GO6 Firmware Versions

GO6 - Release Firmware - 102.7.31

Key Features:

  • Enhanced security measures and improvements
  • Improved S&F failover efficiency
  • Enhanced protocol support (including WWH-OBD)
  • Additional IOX support
  • GO RUGGED support
  • Enhanced vehicle rollover detection
  • Date/Time retrieved from S&F server (If no GPS latch available) on initial install.
  • Modem related improvements (APN list updated, Enhanced performance in Roaming areas, Sprint PRL OTA update)
  • Engine Snapshot data improvements
  • Support for Pre-calibrated Accelerometer
  • Improved VIN detection logic
  • Various Seatbelt and ODO improvements
  • Various Fuel/Diesel improvements
  • Diesel Fuel for vehicles in European market
  • 23 hour heart-beat for BMW vehicles
  • BMW-related improvements (IGN detect fix and enhanced engine data support)
  • Enhancements to Max Road Speed (J1939 protocol)
  • Adjustable timeframe for low voltage warning
  • Device enters disabled state for ‘RAM Error’
  • Support for WWH OBD Data
  • Mobileye, Valor, Dickey-John, NFC DriverID and External Buzzer Support
  • Additional HOS Support (Android, Garmin, SUPA, M4X)
  • APN based on location + more APNs supported
  • Enhanced Intermittent Connection Logic
  • Auto Soft reset when custom parameter applied
  • Enhanced Hybrid/EV data support (Charging/battery/current status)
  • Improved support for vehicles with “STOP/START” technology
  • HID RFID Trigger support
  • DTC UART message support for Third Party device
  • J1939 Fault logging (Cummins) enhancements
More detailed information on Released features and access to the historic changelog is available in the Firmware Release notes, please visit: https://goo.gl/4vr0dO

GO6 - Development Firmware - 102.11.14+

Key Features:

  • Authorized Driver ID ‘whitelist’ support
  • External Device integration via IOX-USB
  • Extended temperature monitoring while IGN OFF
  • DPF and DEF level data support for OBD2 and WWH protocols
  • Support for Mercedes Actros Odometer
  • Various Seatbelt and ODO improvements
  • Various Fuel/Diesel improvements
  • More detailed information on Beta features and improvements is available in the ‘What’s Coming’ section in the Firmware Release notes, please visit: https://goo.gl/4vr0dO
  • If you would like to run this version on your devices please enrol into the ‘Beta Program’. For more information on the ‘Beta Program’ please visit: https://goo.gl/Tki5xk
GO5 & GO4V3 Firmware Versions

GO5 - Release Firmware - 100.9.81

Key Features:

  • Clear Seatbelt State at start of every trip to ensure exceptions aren't carried over
  • Add GO Device Total Fuel Used and Total Idle Fuel Used status data
  • Use a combination of the accelerometer data and the GPS position to validate GPS speed
  • Enhanced Seatbelt Validation
  • APN based on location -- more APNs supported
  • Enhanced Remote Scan Tool Capabilities
  • Engine bus into listen-only mode as soon as GM detected
  • Added DEF level
  • Enhanced Intermittent Connection Logic

GO4v3 Live/Wi-Fi - Release Firmware - 81.6.81

Key Features:

  • Clear Seatbelt State at start of every trip to ensure exceptions aren't carried over
  • Additional HOS Support
  • Add GO Device Total Fuel Used and Total Idle Fuel Used status data
  • Use a combination of the accelerometer data and the GPS position to validate GPS speed
  • Enhanced Seatbelt Validation
  • APN based on location -- more APNs supported
  • Enhanced Remote Scan Tool Capabilities
  • Ability to extend immobilisation off delay to 40 minutes
  • Enhanced Intermittent Connection Logic

GO4v3 RF - Release Firmware - 82.2.20

Key Features:

  • Remove excessive warning lights when the GMLS harness is used
  • Resolve rare issue where unit may reset when entering low power mode
  • Improved GPS filter algorithm to prevent invalid GPS speeds
  • Engine bus into listen-only mode as soon as GM detected
  • Added DEF level
Older Devices Firmware Versions

GO4v2

Versions:

  • 75.1.8: GO4v2 OBD\CAN J1939 RF - Contact Support
  • 76.2.2: GO4v2 OBD\CAN J1939 Wi-Fi - Contact Support
  • 80.7.33: GO4v2 OBD\CAN J1939 GSM CDMA - Contact Support

GO4v1

Versions:

  • 67.7.15: GO4 OBD\CAN GSM CDMA - Contact Support
  • 66.4.21: GO4 J1708 GSM CDMA - Contact Support
  • 65.5.14: GO4 J1939\CAN GSM CDMA - Contact Support
  • 70.3.2: GO4 OBD\CAN RF - Contact Support
  • 69.2.1: GO4 J1708 RF - Contact Support
  • 68.2.1: GO4 J1939\CAN RF - Contact Support

GO3

Versions:

  • 35.3.0: GO3-Wi-Fi - Contact Support
  • 37.3.0: GO3-J1708-Wi-Fi - Contact Support
  • 39.3.3: OBD\CAN GO3 RF - Contact Support

GO2

Versions:

  • 3.3.1: GO2 RF - Contact Support
  • 4.3.2: GO2 Live with Sony Ericsson GM-28 Modem - Contact Support
  • 5.3.3: GO2ARF - Contact Support
  • 6.5.3: GO2A Live with Sony Ericsson GM-28 Modem - Contact Support
  • 14.0.6: GO2BRF - Contact Support
  • 17.1.2: GO2A Live with Sony Ericsson GT-48 Modem - Contact Support
  • 20.3.0: GO2A Live with Multi-Tech F2 GSM Modem - Contact Support
  • 21.3.0: GO2 J1708 Live with Multi-Tech F2 GSM Modem - Contact Support
  • 30.2.3: GO2A Live with Multi-Tech F4 GSM Modem - Contact Support